Scrolling Billboards Ru Scrolling Billboards Ru

Scrolling Billboards

Advertising boards with internal LED backlighting. DiMedia billboards are made of special aluminum profiles with the use of external overhead glass technology. A complete set with sensorless scrolling system of series Smart Scrolling System. Operation via from a smartphone is possible. Four standard sizes are available.

Dimensions of structures
are adapted to your region.

Design Options

Structures can be one-sided or double-sided, with a round or rectangular pole. The most common poster size is 10 m².

  • 6 m² (3 × 2 m)
  • 8 m² (4 × 2 m)
  • 10 m² (3.7 × 2.7 m)
  • 15 m² (5.6 × 2.7 m)

Demonstration section


Three Types of Poles

Rectangular, round and square shapes are available.

  • Square pole
  • Rectangular pole
  • Round pole

ABS cladding

Conceals the kerchiefs and flange, and its sliding bottom part helps to conceal the anchor bolts if the foundation is not deep enough.

Multi-Component Profile System

Unique development of seven profiles with IP54 protection against dust and moisture. Hardened aluminum alloy 6063 (AD31) with high corrosion resistance.

  • The middle profile connects the basic profiles of the frame

  • The upper profile carries the load of the structure frame and is the main protection against water penetration

  • The profile of the frame surrounds the structure and serves as the basis for glass fixing

  • The hinge profile allowed to refuse external metal loops. It provides convenient installation of doors and their smooth opening.

  • The silkscreen profile hides internal elements of structure. It allows to refuse from gluing Oracal film on glass.

  • The cladding profile is equipped with a rubber seal and allows fixing the glass along the entire length of the door

  • Lower cladding profile

Protection degree IP54

Glass Fixation

The overlay glass is placed on top of the door and fixed with decorative bolts or a glazing bead.

Such engineering solutions simplify the process of glass replacement and installation in case of need.

Glass replacement process

Ease of Use

We pay special attention to safe operation in various weather conditions. Safety hinges prevent the doors from breaking in the event of icing, and gas springs prevent the doors from closing in the event of wind gusts.

Safety hinges

Dislodgement and squeezing of the door from the frame in case of icing of internal gutters are excluded.

Eye fasteners

Fasteners for safe lifting of the structure and mounting at height.

Gas springs

Provide easy opening and locking of the door for safe maintenance of the structure.

Internal locks

They provide concealed protection against vandalism and secure the doors.

Transport end locks

They ensure a tighter fit of the door to the frame of the stucture.

Additional supports

Only for Billboard doors 15 m². Additional insurance when working with open doors.

Ventilation System

Ventilation holes with filters at the bottom of the structure and top end fans provide air circulation to maintain the required temperature and humidity level inside the structure.

  • Filters on the bottom ventilation grilles prevent dust from entering the billboard
  • Fans take hot air out of the billboard body

Backlighting Options

It is evenly distributed over the entire construction area. Includes 168 to 420 LED modules on each side.

Backlighting brightness ≈ 3,150 lumens per m².

  • connect the wires of the LED modules quickly and reliably
  • Reliable and waterproof , with sufficient power reserve
  • Bright LED backlighting with and IP67 moisture protection standard

An LED canvas that is installed behind the poster instead of the usual LED backlighting. Smart backlighting creates an animated show with different lighting effects from conventional posters, attracting more attention.

  • MP4, GIF file formats
  • Software for creation and loading
    of animation clips
  • Download via cable, Wi-Fi
    or USB flash drive
  • Ability to switch on and off by timer
LED Smart Backlighting Module

Pole Location Options

The basic version has a center position, but if necessary, the pole can be left and right offset. Wall mounting and special double-section poles are available.

Any color from
the RAL Classic catalogue

The polymer powder painting method is used. End and front elements can be painted in different colors according to the customer's request.

Examples of painting

Silver grey, RAL 7001

Scrolling System

Scrolling Billboards are equipped with the Smart Scrolling System (SSS) of models 76 and 100, showing up to six posters on one advertising surface. Fine tuning of rewind, frame display time and other work parameters is possible. The system is equipped with a stop function when the poster breaks.

  • High reliability of the system and other components. Warranty up to 2 years.
  • No sensors or foil labels on posters
  • Configure and manage your system from your smartphone via Bluetooth
Cooler power
220V input
Upper motor power
Lower motor power and control line
Upper motor
Lower motor
Backlighting power
System block

Back-up Power Supply

Industrial gel batteries are used. The system consists of the battery charger, rechargeable batteries and the charging controller.

Mobile application

Mobile application for setting up and managing your system via Bluetooth. Works on Android smartphones.

  • Included user manual
  • Over 20 fine-tuning functions

Two Frame Options

Frames with appropriate reinforcement are provided for different climatic conditions. In case of strong wind loads, a double-circuit frame should be used.

Single-circuit1 to 4 wind class, up to 16.8 m/s
Double-circuit5 to 7 wind class, over 25.8 m/s

Delivery Options

The Scrolling Billboard can be delivered either ready-made or as a self-assembly kit.

What is included in the delivery of a ready-made Scrolling Billboard:

  • Slipform head*
  • Pole and its cladding
  • Fixing elements
  • Design Data Sheet
  • Individual project

* Metal, shipping slipway is used for safe transport. Its cost is not included in the construction cost. Up to four Scrolling Billboards are transported in one slipway.

For transportation the necessary minimum height of the truck side is 3.05 m.

Structural passports by size:

Documents included in delivery:

What is a self-assembly kit:

This is a set of components for self-assembly of a Scrolling Billboard. The system consists of a basic kit and a self-purchase kit.

1. Basic kit

Includes the details on which our company specializes:

  • Aluminum profile system
  • Lightweight and heavyweight fittings, locks
  • Gas springs
  • Rubber seals kit
  • Ventilation system
  • ABS-plastic pole top cladding
  • Design data sheet
  • Personal project

2. Self-purchase kit

A set of components, most of which can be purchased independently.

You can order a number of components at your location, for example, a metal frame and a pole, thus saving on delivery. Components such as glass can be ordered directly from your nearest factory, which will also reduce costs.

Composition of self-purchase kit:

  • Tempered glass
  • Frame metal rolling (depending on the wind load)
  • Metal rolling for pole
  • Smart backlighting kit (option)
  • Scrolling system kit (option)
  • LED backlighting kit
  • Rods for tensioning system (statics)
  • ABS-plastic pole lower cladding
  • Electrical installation materials
  • Fixing systems
1 Basic kit
2 Self-purchase kit
1 Basic kit
2 Self-purchase kit


  • Providing technical advice
  • Provision of technical documentation
  • Guaranteed replacement of goods
  • Post-warranty service
  • Service maintenance of advertising structures
  • Sale of spare parts for our products
  • Installation of structures
  • Installation manager (specialist visit to monitor the installation process)
  • Training of your specialists

International Shipping

Delivery is carried out by own DiMedia trucks or by means of transport companies. Up to 8 assembled Scrolling Billboards (including poles) and up to 30 as a self-assembly kit can be transported in a low-frame or open top container.

  • By Sea
  • On the roads
  • Railway tracks